The Samsung DA97-12624A refrigerator flipper assembly with camera is a smart, energy-efficient door flap that seals French refrigerator doors while offering interior visibility through an integrated camera. It helps reduce cold air loss and lets users view contents remotely via Samsung’s smart apps. Ideal for smart kitchen upgrades, it’s compatible with select Samsung fridge models.
“Stay tuned with us as we explore everything you need to know about the Samsung DA97-12624A refrigerator flipper assembly with camera—from smart features and installation tips to real-world performance and buying advice.”
Introduction to the Samsung DA97-12624A Refrigerator Flipper Assembly with Camera
In today’s world of smart home innovations, the refrigerator is no longer just a place to store your food. Samsung, a global leader in consumer electronics, has introduced an impressive component to enhance both functionality and efficiency—the Samsung DA97-12624A refrigerator flipper assembly with camera. This part is far more than just a mechanical hinge or door seal; it’s a blend of design, insulation technology, and intelligent imaging.
Designed specifically for French-door Samsung Refrigerator Door Flipper parts, the DA97-12624A part serves as the center mullion—the vertical flap that seals the gap between the doors when they close. But with a built-in camera, it takes functionality to the next level, offering smart visibility into your refrigerator’s interior without opening the doors. Whether you’re checking if you’re low on milk from your phone or simply trying to save energy, this innovation caters to modern lifestyles.
In this article, we’ll dive deep into every aspect of the DA97-12624A—from features and installation to maintenance and comparisons—so you can make an informed decision about upgrading or replacing your Samsung fridge flipper.
What Is the DA97-12624A Flipper Assembly?
The DA97-12624A flipper assembly is a specially designed part found in many Samsung French-door refrigerators. Also known as a Samsung fridge flipper, this component serves a dual purpose. First, it acts as a sealing flap between the two refrigerator doors, improving thermal insulation and reducing energy waste. Second, when equipped with a built-in camera, it offers users remote visibility into their fridge’s interior.
The inclusion of a camera transforms what would otherwise be a simple mechanical part into a smart device. By capturing images of the refrigerator’s contents, this flipper assembly communicates with Samsung’s Family Hub or SmartThings app, allowing users to check what’s inside from their smartphones.
Constructed from high-durability plastic and metal alloys, the DA97-12624A is built to withstand repeated use while maintaining its alignment and function. It includes electrical connections to power both the heating elements (to prevent condensation) and the internal camera, making it a technologically complex yet essential component in high-end refrigerators. If you’re uncertain about the internal components and part names, consulting the Samsung refrigerator parts manual PDF is highly recommended.
Key Features and Technical Specifications
The Samsung DA97-12624A refrigerator flipper assembly with camera is not just another replacement part—it’s a high-tech component loaded with innovative features. At its core, this flipper acts as an energy-saving seal that prevents cold air from escaping. However, Samsung has gone a step further by embedding a smart camera that enhances usability and functionality.
Key Features:
- Built-in Camera: Offers live or periodically captured images of your refrigerator’s interior via Samsung’s Family Hub or SmartThings app.
- Auto-Closing Flap: Ensures tight door closure to improve energy efficiency.
- Heater-Embedded: Prevents frost buildup and condensation, especially in humid environments.
- OEM Certified: Samsung original part—ensuring proper fit and optimal compatibility.
- Durable Construction: Reinforced plastic and metal materials designed to last for years.
Technical Specifications:
| Specification | Detail |
| Part Number | DA97-12624A |
| Material | Plastic composite with metallic hinge core |
| Compatibility | Multiple Samsung French-door models |
| Camera Support | Yes (for compatible models) |
| Heater Function | Integrated |
| Weight | Approx. 1.5 to 2.0 lbs |
| Dimensions | Varies by model (typically 14x4x3 inches) |
Some users mistakenly confuse this assembly with the da97-07661c, another commonly used flipper assembly. However, they serve different refrigerator models, so part numbers must be matched carefully.
Benefits of the Camera-Integrated Flipper Assembly
Adding a camera to a flipper assembly may seem unconventional at first, but the benefits it offers are both practical and innovative. The Samsung DA97-12624A refrigerator flipper assembly with camera enhances the functionality of your fridge in multiple ways, making it a worthy investment for modern households.
Energy Efficiency:
The tight seal created by the flipper minimizes the amount of cold air that escapes each time the door is opened. Combined with the camera, users can now check fridge contents without opening the door—saving both energy and reducing wear on the compressor.
Remote Monitoring:
Ever stood at the grocery store and wondered if you were out of eggs or milk? With this camera-enabled flipper, you can quickly check your refrigerator’s contents through your smartphone, thanks to Samsung’s connected ecosystem.
Food Management:
By offering visibility into what’s inside, this feature helps reduce food waste. You’re less likely to overbuy or forget about items hidden at the back.
Smart Home Integration:
The camera supports Samsung’s Family Hub and SmartThings platforms. You can set notifications for expiring food, view fridge content timelines, and even receive alerts if a door is left open.
Improved Aesthetics and User Experience:
This component seamlessly integrates into the fridge design and doesn’t protrude or add visual clutter, maintaining the sleek aesthetic Samsung is known for. It also complements other components like Samsung Refrigerator Shelf replacement parts, offering a cohesive and functional design.
Compatible Samsung Refrigerator Models
The DA97-12624A flipper assembly with camera is not universally compatible across all Samsung refrigerators, which makes it crucial to check model compatibility before purchasing. This assembly typically fits a range of Samsung Refrigerator Door replacement parts, especially those in the RF and RFG series.
Here are some common compatible models:
- RF23HCEDBSR
- RF28HDEDBSR
- RF263BEAESR
- RF323TEDBSR
- RF24FSEDBSR
- RF25HMEDBSR
These models often feature Family Hub screens or are compatible with Samsung’s SmartThings app. You can usually find your model number on a sticker inside the fridge or near the crisper drawer.
⚠️ Important Note: Samsung sometimes updates its internal parts without changing the overall model number. Always double-check the part number (DA97-12624A) and verify whether it ends in DA97-12683A or DA97-12683B, as these suffixes can indicate minor design differences affecting compatibility.
How to Install the Samsung DA97-12624A Flipper Assembly with Camera
Replacing or installing the DA97-12624A assembly may seem complex due to its camera and electrical components, but it’s manageable with basic tools and some caution.
Safety Precautions
Before handling any refrigerator part, always unplug the appliance to prevent electric shock or short circuits. Use insulated gloves if possible, and avoid touching wiring terminals directly. Make sure the refrigerator doors are supported or taped in place to prevent accidental closure during installation.
Removing the Old Flipper Assembly
- Open the doors fully to access the central flipper section.
- Locate the screws or tabs that secure the old assembly—these are often found at the top and bottom hinges.
- Disconnect wiring from the flipper assembly, which powers the heating and camera module. Gently pull out the connectors—do not yank.
- Lift out the old flipper once it’s detached from its hinge mounts.
It’s a good idea to clean the hinge area and wiring contacts before installing the new part.
Installing the New Assembly and Connecting the Camera
- Align the new flipper into the hinge slots and confirm it sits snugly against the frame.
- Reconnect the wiring to the camera and heater terminals, matching the connectors exactly.
- Secure the assembly with screws or clips—do not overtighten, as this can crack the plastic.
- Test the door closure to ensure the flipper seals correctly.
- Power the refrigerator and check if the camera feed appears in the SmartThings app or Family Hub display.
Maintenance Tips and Common Issues
Like all mechanical parts, the DA97-12624A flipper assembly requires periodic attention to maintain performance.
Maintenance Tips:
- Clean the camera lens regularly with a soft microfiber cloth to avoid blurry images.
- Inspect the rubber seal around the flipper for cracks or dirt—clean with mild soap and water.
- Lubricate hinges lightly if they become noisy (avoid grease near electrical parts).
- Update firmware via the SmartThings app to ensure smooth camera connectivity.
Common Issues:
- Loose Fit: If the flipper isn’t aligned properly, it may not close fully, leading to condensation.
- Camera Disconnect: Often caused by loose internal wiring—reseat connectors firmly.
- Heater Failure: If condensation appears frequently, the embedded heater may be faulty and need replacement.
- Camera Lag or No Feed: Check Wi-Fi signal and app compatibility; restart the Family Hub system if needed.
Where to Buy the DA97-12624A Flipper Assembly with Camera
You can purchase this flipper assembly from various trusted sources, both online and in-store. Here are some reliable options:
| Vendor | Approx. Price | Notes |
| Samsung Parts Store | $140–$160 | OEM guaranteed |
| Amazon | $120–$150 | Check seller ratings for OEM parts |
| Sears PartsDirect | $130–$160 | Offers warranty options |
| HnK Parts | $110–$140 | Compatible variants may be available |
| eBay | Varies | Check part number and return policies |
OEM vs Aftermarket: Which Flipper Assembly Should You Choose?
When choosing a replacement, you may come across both OEM (Original Equipment Manufacturer) and aftermarket options. While both may look similar, there are key differences.
| Feature | OEM (DA97-12624A) | Aftermarket Versions |
| Compatibility | Guaranteed | Not always accurate |
| Camera Support | Fully functional | Often lacks camera support |
| Quality & Durability | High | Varies by manufacturer |
| Price | Higher | Typically cheaper |
| Warranty | Usually included | Rarely included |
User Reviews and Real-World Experiences
User feedback on the Samsung DA97-12624A refrigerator flipper assembly with camera has been generally positive, particularly regarding its ease of installation and smart features.
Customers on platforms like Amazon and Samsung’s official store frequently praise:
- “Smooth door closure and great energy efficiency improvement.”
- “Camera view is super helpful when I’m at the store.”
- “Installation took 15 minutes—connected perfectly.”
Negative reviews usually cite issues with third-party sellers shipping non-OEM parts or confusion about compatibility with older fridge models.
Why This Flipper Assembly Is Essential for Smart Refrigerators
In the era of smart homes, the kitchen plays a central role. Appliances are expected to be more intelligent, efficient, and interconnected—and the Samsung DA97-12624A refrigerator flipper assembly with camera fits that mold perfectly.
This assembly contributes to a smarter kitchen by reducing energy loss, improving food visibility, enabling smarter grocery shopping, and integrating seamlessly with Samsung’s smart ecosystem.
Conclusion: Is the Samsung DA97-12624A Flipper Assembly with Camera Worth It?
Yes—if you’re using a compatible Samsung French-door refrigerator and want to enhance both performance and convenience, the Samsung DA97-12624A flipper assembly with camera is a smart investment. It improves energy efficiency, allows remote food monitoring, and plays a key role in building a connected kitchen.
Frequently Asked Questions (FAQs)
1. Does the DA97-12624A flipper assembly work without the camera connected?
Yes, it can still act as a sealing flap, but the camera features won’t function unless connected to a compatible system.
2. How can I tell if my refrigerator supports the camera function?
Check your model number and refer to the Samsung refrigerator parts manual PDF. Smart models with Family Hub are typically compatible.
3. Can I install the flipper assembly myself?
Yes, most users can handle installation with basic tools. However, professional help is advisable if you’re not comfortable with wiring.
4. How long does this flipper assembly typically last?
With proper maintenance, the DA97-12624A can last several years without needing replacement.
5. Is there a warranty for the DA97-12624A flipper assembly with camera?
If purchased from official retailers like Samsung or Sears PartsDirect, it usually includes a limited warranty.
Also Read:
Leave a Reply